Soundscape Finale

I didn’t contact my tutor in the end. Having reviewed what I’ve done so far and taken a step back, I yet again have decided to push on. The fact that I’m struggling is indicating that I am pushing myself, and that’s how we learn. I made a new piece of felt to manipulate into  a sample, and decided the best way to mould it would be with modelling mesh attached to the reverse. I had considered heat reactive moulding mesh, but the problem would be finding a suitable shape to mould it over whilst heating. I thought that mesh would allow me to play with it a bit after construction. To give a neater finish and cover the sharp edges of the mesh, I wrapped the edges with ribbon before handstitching to the reverse of the felt. In the final piece, I have decided to use felt backing for an even neater finish.

IMG_4430

Once I was happy with the initial small sample I set about making the final piece. I made a larger rectangle in felt and stitched over in metallic thread using my wavy painting as a guide.  I cut it partially into strips before applying the mesh in overlapping sections on the reverse. In moulding the shape, I took inspiration from a sketch in my theme sketchbook of pulsing soundwaves, and also the appearance of speakers. The finished piece does actually feel like a modern speaker. Having got the desired shape, I took a photo and drew a rough plan of where I wanted my couching to run. For this I referenced my final painting plan. I had it in mind that the gimp looks very much like guitar strings, and to me the tight coils were akin to the strings wound around the pegs on a guitar head.

 

IMG_4471ed

So here it is:

 

IMG_4472ed

The couching highlights the contours of the shape to a certain extent, and I hope also have a vibrating quality both in form and colour against the background. I have laid out the main work to show the progression through the design process, and I think I can demonstrate my thinking. I am concerned about presentation for assessment as the final piece incorporates a lot of separate ideas, rather than progression through a single line. Most of the development has also been done in my sketchbook, which means it won’t be displayed as one piece like this.

IMG_4475ed

Sound Sketch Development

 

I had a look through my work from previous assignments, particularly colour and mark making to ge ideas on how I could inject some vibrancy into my work. I was particularly pleased with some pieces I had made before by combing inks. Having done this I made a couple of sketches of waves that worked well.

IMG_4421ed

During this time I also attended the Knit and Stitch Show at Alexandra Palace. There I had lots of inspiration on yarns I could use, such as these spun sari silks and viscose gimp samples. I worked a new felt sample shown in the photo below, which indeed have more vibrancy and maintained the feeling of sound as the source inspiration.

IMG_4425ed

From here I had a look again at structure. I have been thinking about some African tribal beaded jewellery, with long almost floor length strings of beads hanging centrally down the front like a fragmented panel.

IMG_4426ed

The next suggested step in this assignment was to make larger scale drawings based upon pieces in my sketchbook. I took a section from my waved ink sketch and came up with this design.

DSC_0127ed

In the course of researching this project, I happened across the work of Martin Klimas, a photographer who has photographed drops of paint on acetate placed over a speaker playing loud music, The drops dance in the air creating a visual expression of the sounds. I made a couple of large painted sketches based on these photos.

DSC_0128ed

I then spent a day monoprinting with acrylic paint, drawing waveforms and adding splashes of colour, trying to marry these two main sketch ideas.

DSC_0126ed1

DSC_0126ed2

The final piece I came up with is below. I liked the way the waves were unfurling, tighter in the top left corner, becoming looser towards bottom right.

DSC_0129ed

Looking back over my work after a break from it, I am truly undecided whether to pursue this piece or give up on it entirely and start again. Every step has seemed forced and a struggle, and I fear that by pushing myself too hard, I will end up with a final piece that I am not completely pleased with. I am keeping a number of themed sketchbooks that have developed in a more organic way, without me even thinking of them in terms of theme books. Would I be better following up with one of these and execute something cleanly that might be a bit more boring?

I am going to contact my tutor for advice at this point, and put forward alternative theme ideas. I think I know the answer though…

Sound samples

Having looked at materials, structures and colour ideas, I moved my sketch work forward by working some small felt samples.  To approach this I first sketched out some smocking ideas.

IMG_3921ed

There were a number of problems with smocking as combined with the stitch detail, the ideas all ended up looking very busy or so technically fussy as to detract from the overall effect. A lot of the detail would also be lost in folds, and the undulating design could easily be lost and disjointed.  I didn’t like the gradually narrowing smocked diamonds, as alternate rows were asymmetrical and I found it unsettling. When I was playing with a piece of felt, the most visually pleasing effects were acheived with a very simple waveform as sketched below.

IMG_3924ed

I made a sample of felt by dry felting commercially dyed wool tops into a mechanically manufactured felt base. I then selected a few tonal metallic and cotton threads to embellish with machine stitched wavy lines.

IMG_3926ed

IMG_3928ed

I then wanted to see how the felt could be stiffened to hold a solid shape, and made a small sample with pelmet thickness vilene sandwiched in felt.

IMG_3929ed

At this point I sent my sketchbook to my tutor, who felt that I had settled on an idea too soon and that the samples needed to vibrate with colour. I completely agree but have to admit that I am still struggling.

Sound sketchbook cont.

 

 

Whilst researching soundscapes and visual representations of sound, I came across this project, whereby various ambient recordings were made and used to create a 8 or 16 channel soundscape composition despicting an imagined enviroment. The website features a spectogram analysis of a section of the piece, which I have reinterpreted in applque and stitch in this small sample.

IMG_3919ed

Having spent time thinking a lot about shape and form, I wanted to explore colour inspirations for my piece. As a doctor, my first thought was related to neurosciences and how we perceive sound. In a disorder known as synaesthesia, the brain interprets input from one sense as another. The most common example of this is being able to ‘see’ sound. During my recent hospitalisation I had my own experience of synaesthesia, where loud noises caused my central vision to distort like a large drop causing a circular ripples to the periphery (rather similar to my last sketch)  followed by intense tingling on the tip of my tongue. I research sound/vision synaesthesia and found a few artists who experience music as colours. I have scrapbooked a page based on this. Kandinsky was also thought to be synaesthesic, and in some of his colour composition, his stated aim was for people to be able to ‘hear’ his paintings. A frequent description was of bass notes appearing in deep purple, and electric guitar sounds in a buttery yellow. I thought that these would be a good combination in my piece as opposites on the colour wheel.

IMG_3920ed

This was my sketch inspired by this reading. I had also had a look through all of my work so far from previous assignments and liked the energy in my gouache experiments with knife painting. Here I mixed the purple hue directly on the paper with the palette knife, and the resulting flecks of red and blue worked quite nicely.

IMG_3923_edited-1

Sound sketchbook

I got going on my theme book by making a cover. I decided the vinyl single format was a nice size to work with, and made a mock up of a Parlophone record. It was a light way to get inspired and worked quite well!

IMG_3912ed

I then started my research by looking at the work of Anne Kyyro Quinn, as suggested to me by my tutor. She is a textile artist and interior designer who specialises in felt soundproofing installations. I made a couple of sketches based on her work, and looked at the properties of soundproofing more generally. I really admired the aesthetic of her work, and like the uniformity of the pieces in colour, texture and form. I can see that pleasing design is generally pared back and not too fussy, and I have a tendency to want to do too much in a single piece.

IMG_3913ed

IMG_3914ed1

At this point, I was quite fixed on the idea of using smocking or something akin to smocking in manipulating felt for my final piece. I wanted to explore the idea of having pattern visible within or through the main structure, hence the drawing on the right which was laminated with holes within the regular pattern.  The main principles that I want to take forward from this research is the thickness and porous nature of the base fabric, and the idea of optimal geometry in the three dimensional surface design.

I went on to do some sketches of what I would immediately visualise when I thought about sound. Waveforms was an obvious starting point, and one problem I saw in representing sound in a sketch is the lack of physical movement. I thought about the large scale drawings we had seen recently at the Jenny Saville exhibition in Oxford, and thought I could use the idea of drawing waveforms on top of each other to represent time lapse and movement.

IMG_3915ed

IMG_3916ed

Having drawn the line drawings, I realised I had essentially drawn a Joy Division album cover, albeit subconsciously!  The traced sketch incorporated the idea of a musical notation and the end of staves on music paper, and also looked a bit like piano keys.

My next tack was to look at other textile artists work, and see if any pieces made me think of sound. I had recently bought Drusilla Cole’s ‘Textiles Now’, and felt inspired by a number of pieces. I was particularly drawn to ikat woven pieces by Ptolemy Mann, some of which have a pulsing, vibrating quality, and also have parallels with graphics equalizer displays. Jessica Preston is interesting for the purposes of this project, as she uses intricately and elaborately folded felt to create origami-style three dimensional forms. I was drawn to these not only due to the parallels with my reading on soundproofing, but also because I felt the shapes as shown in my sketch have a vibrating quality, and some of her pieces look rather like speakers to me.

IMG_3917ed

From here, I had another go at sketching sound and came up with this.

IMG_3917ed2

At this stage I think that I fell into the trap of being too focussed on an end product when approaching the sketchbook. On the positive side, I am finding this process of review useful and quite liberating. I feel less anxious about changing direction and discovering new ideas for development.

Getting Back

Followers of my learning log may have noticed a rather large hiatus since my last post. This is partly as I have been struggling somewhat with my themed sketchbook and development, and I have been working in a more direct dialogue with the sketchbook making notes as I go, rather than reflecting here. I have also had the misfortune of an unexpected stay in hospital. A very frightening experience involving being unable to move from flat on my back for hours on end. I am happy to say that after almost a fortnight in hospital I have been discharged home, but tiredness and motivation problems have resulted in a slow return to the project in hand.

I had started a theme book on ‘Tea’, but my tutor was right that I had settled on an idea that I felt was within my grasp rather than challenging myself. In my third assignment I had explored the idea of creating a soundscape in textile manipulation, but hadn’t quite found a resolution. She felt that this was a much more exciting proposition, and I tended to agree. The problem with chosing this topic is that I have had to put a lot of work into finding sketch ideas for a non-visual, somewhat abstract topic. My approach has been quite methodical and formal, and I feel a little stilted and forced. In the next posts I will document what I have done thus far, and hope that this process will in itself help me find a distance from it and re-engage in a new direction.

Studio Space

I have had a bit of a break from blogging whilst our basement was converted for use as my art studio. I’m delighted to say that it is now finished, and I have felt very inspired when down there. We hae rigged it with daylight bulbs and lamps, and the results are really good. I have covered most of the wall facing my work table with self-adhesive cork tiles, and am getting in the habit of pinning my most successful sketches and inspiring images and colour bags.  Here are a few pictures. The photo of my sketches looks a little washed out due to the flash on my camera. I couldn’t keep stiill enough without!

I have spent the last couple of weeks concentrating on my sketchbook having posted off assignment 4 for tutor feedback. I got that back this week and feel encouraged by her comments. The criticisms of my final project are bang-on and I feel invigorated to develop it further.

This weekend was the Knitting and Stitching Show a Alexandra Palace, which as well as an opportunity to bolster my stash, filled me with inspiration from looking a some of the work on show. I also had a really useful and interesting conversation with OCA tutor Pat Hodson about my current project and the course in general.

In other extremely exciting news…. I am going to Jaipur on a textiles holiday with Colouricious!! I’ll be travelling with a friend, and we will be going December 2013. Plenty of time to get prepared!